Here are some details of the body sock mounting hardware. Any details of this may change before it is finalized.

Note how low the top of the fairing sits. That is needed for good forward vision. The handlebar extensions allow the fairing to be adjusted lower. Also the top of the fairing is cut shorter than stock. My hands actually sit higher than the fairing which isn't a problem because the sock smooths the transition.

Also note the bottom mounts. They are simple angle tabs that mount to the lowrider bosses. The fairing solidly mounted. A longer wheelslot is needed to mount the bottom of the fairing this way.

67-10-04 This is an old design. Now the stock front fairing supplied by MHP, Windwrap RNS and RNS mount will work very nicely to support a body sock on the V2.

Back to Mark's Home Page.